Quick answer: To replace a steering wheel (driver) airbag, match the OEM part number and color of your original module, disconnect the battery and wait the time set by the factory manual, release the module, unplug the connector and install the replacement, then clear SRS codes with a scan tool. If the airbag deployed, the clock spring and SRS control module also need inspection or replacement. Airbag work should be done by a qualified technician.
The driver steering wheel airbag is the most frequently replaced SRS component — after a frontal crash, a cracked or faded cover, a steering wheel upgrade or an SRS fault. Partzora stocks more steering wheel airbags than any other part type, and this guide covers when to replace, how to choose the right unit for your vehicle, and what the job involves.
When do you need to replace a steering wheel airbag?
- After a frontal deployment — a deployed airbag is single-use.
- SRS warning light with a code pointing to the driver airbag circuit (after the clock spring and wiring are ruled out).
- Damaged cover — cracks, cuts or a torn emblem can affect how the cover splits during deployment.
- Steering wheel swap — for example, moving to a different trim wheel that needs a matching module.
- Recall — check your VIN at the NHTSA recall lookup first.
Steering wheel airbag fitment by popular model
Generations matter. Use this table as a starting point, then confirm the part number on your original airbag.
| Make | Model & years | Genuine OEM airbag |
|---|---|---|
| Toyota | Camry 2018–2023 | Driver airbag, black |
| Toyota | Camry 2025–2026 | 45130-06540-C0 |
| Toyota | Corolla 2019–2024 (Japan-built, VIN J) | Driver airbag, black |
| Toyota | Corolla 2019–2022 (US-built, VIN 5) | Driver airbag, black |
| Toyota | Highlander 2020–2023 | Driver airbag, black |
| Toyota | Tacoma 2012–2023 | Driver airbag, black |
| Lexus | RX350 2016–2022 | Driver airbag, black |
| Lexus | RX350L 2018–2022 | Driver airbag, black |
| Lexus | IS300 2014–2019 | Driver airbag, black |
| Lexus | NX300 2018–2021 | Driver airbag, black |
| Honda | Accord 2018–2022 | Driver airbag |
| Honda | Accord 2023–2025 | 77801-30A-A82ZA |
Browse by model: Camry · Corolla · RAV4 · Highlander · 4Runner · Lexus RX350 · Lexus ES350 · Accord · Civic · CR-V
How to choose the right steering wheel airbag
- Match the OEM part number on the back of your module. Our guide on reading OEM airbag part numbers shows where to look.
- Match the generation — for example, Accord 2018–2022 and 2023–2025 use different modules.
- Match the assembly plant if needed — Corolla airbags differ between Japan-built (VIN J) and US-built (VIN 5) vehicles.
- Match the color to your steering wheel trim.
- Buy genuine and undeployed — see what makes an airbag undeployed.
What the replacement process involves
This overview helps you understand the job and talk to your technician. Always follow the factory service manual for your exact vehicle.
- Power down: Ignition off, negative battery terminal disconnected, then wait the time specified in the manual so the SRS backup capacitor discharges.
- Release the module: Most Toyota, Lexus and Honda wheels use spring clips or bolts accessed from the sides or back of the wheel.
- Disconnect safely: Release the connector locks and the horn connector. Store the old airbag cover-side up, away from heat.
- Install the new module: Connect the airbag and horn connectors until they lock, then seat the module evenly.
- Inspect the clock spring: Replace it if the airbag deployed or the SRS code points to the spiral cable.
- Reconnect and verify: Reconnect the battery, clear codes with an SRS-capable scan tool and confirm the airbag light turns off.
Important: Never test an airbag with a multimeter, and never dispose of a live airbag in household trash — return it to a recycler or dealer for proper handling.
How much does it cost?
Genuine undeployed steering wheel airbags on Partzora currently range from about $249.99 to $369.99 for most Toyota, Lexus and Honda models, plus labor. For a full breakdown, read our airbag replacement cost guide.
Frequently asked questions
How long does it take to replace a steering wheel airbag?
For a trained technician, replacing an undeployed steering wheel airbag on most Toyota, Lexus and Honda models typically takes under an hour. After a deployment, add time for the clock spring, SRS module and diagnostics.
Do I need a new clock spring when replacing a steering wheel airbag?
Not always. If the airbag deployed, the clock spring should be inspected and is often replaced because the deployment and heat can damage it. If you are swapping an undeployed airbag for cosmetic or fitment reasons, the original clock spring can usually stay.
Will the airbag light turn off after replacement?
If the new airbag matches the original part number and connects correctly, the SRS light usually turns off after codes are cleared with a scan tool. If crash data was stored after a deployment, the SRS module must be reset or replaced first.
Can I swap a steering wheel airbag between Toyota models?
Only if the OEM part number is identical. Toyota and Lexus steering airbags often look similar across models but differ in connectors, inflator stages, emblem and color code.
Does the steering wheel airbag color matter?
Fitment is the same, but the cover must match your interior. Most listings note the color, such as black, and Toyota part numbers often end in a color code like C0.
Find your steering wheel airbag: Use the vehicle finder on the Partzora homepage or browse all steering wheel airbags. Every part is covered by our warranty & returns policy.